Mapir USB Power + FPV Cables for Survey 3/2 Cameras
Use this cable to power your Survey3 and Survey2 cameras through the USB port. When powering the camera with USB it is not necessary to install the camera battery, thus enabling you to reduce the overall payload weight. These cables also incorporate a single SD video out for use in a First Person View (FPV) setup or connecting to an external recorder.
Please Note: You will typically need to convert the power source to the required 5 volts of the Survey cameras in order to use this cable. This is typically accomplished with a UBEC or other voltage regulator.
CABLE PIN DESIGNATIONS
||PIN 6||MIC Input|
|PIN 2||USB -
||PIN 7||MIC Input|
|PIN 3||USB +
||PIN 8||SD Video -|
|PIN 4||ID *
||PIN 9||SD Video +|
|PIN 5||Ground||PIN 10||Audio +|
* Pull PIN4 Low to Ground with Resistor To Activate PIN 6-10
DRONE MOUNTS & ACCESSORIES
A comprehensive range of tilting and static drone mounts are available for payloads of app to four cameras. These include generic, DJI Mavic, DJI Phantom, DJI Inspire, DJI Matrice, Nimbus, 3DR Solo, 3DR Iris+ and 3DR X8 mounts. Other accessories include a reluctance calibration ground target (RECOMMENDED), advanced GPS receiver, cable options, etc. Please refer to the DATASHEET.
- 20 or 50 cm cable
- Single or split dual camera cables
|Single 20cm (STANDARD other options available) Dual 20cm (two camera version) Single 50cm (one camera version) Dual 50cm (two camera version)|
|Weight||4.9 grammes (Single 20cm)
|Power||5 Volt 1 Amp
|USB Connection||USB Angled Connector
|Male Servo - White Wire||SD Video Positive +
|Male Servo - Red Wire||Microphone Positive +|
|Male Servo - Black Wire||Ground -|
|Female Servo - Re Wire||%v DC power +|
|Female Servo - Black Wire||Ground -|
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.